Siemens SITRANS LR200 HART Guía Para La Puesta En Marcha Rápida página 9

3. Explosion-proof wiring method
Approval Rating (see nameplate, inside front cover)
FM/CSA:
Class I, Div. 1, Groups A, B, C, D
Class II, Div. 1, Groups E, F, G
Class III
• For power demands see
5 of Appendix A.
• For wiring requirements see
Appendix A, for drawing number 23650597.
4. Non-incendive wiring method
Approval Rating (see nameplate, inside front cover)
FM:
Class I, Div. 2, Groups A, B, C, D T5
• For power demands see
page 5 of Appendix A.
• For wiring requirements see
for drawing number 23650537.
5. Intrinsically Safe wiring method (barrier required)
Approval Rating (see nameplate, inside front cover)
FM/CSA:
Class I, Div. 1, Groups A, B, C, D
Class II, Div. 1, Groups E, F, G
Class III
ATEX II 1 G, EEx ia IIC T4
ANZEX Ex ia IIC T4
(Tamb = –40 to 80 °C) IP67
IECEX TSA 04.0020X
• For power demands see
page 5 of Appendix A.
• For wiring requirements:
N. America:
Europe:
Australia:
International:
Page EN-8 SITRANS LR200 (HART) – QUICK START MANUAL
Curve 2 (Flameproof, Increased Safety, Explosion-proof)
Wiring Drawing (Explosion Proof: FM/CSA)
Curve 1 (General Purpose, Intrinsically Safe, Non-incendive)
Wiring Drawing (Non-incendive: FM)
Curve 1 (General Purpose, Intrinsically Safe, Non-incendive)
Wiring Drawing (Intrinsically Safe: FM)
See
for drawing number 23651611,
Wiring Drawing (Intrinsically Safe: CSA)
or see
for drawing number 23651621.
Follow local regulations.
Follow local regulations.
Follow local regulations.
T4
on page 3 of Appendix A,
Valid for:
N. America
on page
on page 1 of
Valid for:
N. America
on
on page 2 of Appendix A,
Valid for:
US/Canada
Europe
Australia
International
on
on page 4 of Appendix A,
7ML19985QL83