Electrical Connection; First Use; Daily Use; Removing Stains - Zanussi ZWG1100 P Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Electrical Connection

This machine is designed to operate on a
220-240 V, single-phase, 50 Hz supply.
"An incorrect power supply may void your
warranty."
Check that your domestic electrical installation
can take the maximum load required (2.0 kW),
also taking into account any other appliances
in use.

First Use

Run a cotton cycle at 90 °C, without any
laundry in the machine, to remove any
manufacturing residue from the drum and
tub. Pour 1/2 a measure of detergent into
the dispenser drawer and start the machine.

Daily Use

Sorting the laundry
Follow the wash code symbols on each
garment label and the manufacturer's washing
instructions. Sort the laundry as follows: whites,
coloureds, synthetics, delicates, woollens.
Before loading the laundry
Never wash whites and coloureds together.
Whites may lose their "whiteness" in the
wash.
New coloured items may run in the first
wash; they should therefore be washed
separately the first time.
Make sure that no metal objects are left
in the laundry (e.g. coins, hair clips,
safety pins, pins).
Remove persistent stains before washing.
Button up pillowcases, close zip fasteners,
hooks and poppers. Tie any belts or long
tapes.
8
Important!
Connect the machine to an earthed socket.
The manufacturer declines any responsibility
for damage or injury through failure to comply
with the above safety precaution. Should the
appliance power supply cable need to be
replaced, this should be carried out by our
Service Centre.
Ensure that the electrical and water
connections comply with the installation
instructions.
Rub particularly soiled areas with a special
detergent or detergent paste. Treat curtains
with special care. Remove hooks or tie them
up in a bag or net.

Removing stains

Stubborn stains may not be removed by just
water and detergent. It is therefore advisable to
treat them prior to washing.
Blood: treat fresh stains with cold water. For
dried stains, soak overnight in water with a
special detergent then rub in the soap and
water.
Oil based paint: moisten with benzine stain
remover, lay the garment on a soft cloth and
dab the stain; treat several times.
Dried grease stains: moisten with turpentine,
lay the garment on a soft surface and dab the
stain with the fingertips and a cotton cloth.

Hide quick links:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Zwg1120 p

Tabla de contenido