Weight Monitoring - wissner-bosserhoff sentida 7-i Manual De Instrucciones

6.6 Weight monitoring

01
02
71,8 kg
07
06
01 The saved weight change values can be displayed as a curve on the CareBoard
02 Save & Send: Save and send the weight currently displayed (transmission of weight data
to the in-house care software).
03 The left field on the display shows the absolute weight in steps of 0.5 kg.
04 The right field on the display shows the increase and loss of weight in steps of 0.5 kg.
05 Press this button to enter the resident's height. Based on the weight measured, the resi-
dent's BMI is then calculated automatically and displayed next to the button.
06 With the freeze button, you can add additional weights, or remove weight from the bed
without influencing the absolute weight or the weight change.
07 Here, you can set the absolute weight and the weight changes to 0 kg.
▪
Press once and the right field on the display flashes.
▪
Press a second time and the value is set to 0 kg.
If the resident is in bed:
▪
Short pressing: The relative weight display flashes
▪
Pressing once again: Relative weight display is set to zero
In case of a change of resident:
▪
Long pressing: Both displays flash
▪
Pressing once again: Both displays are set to zero
03 04
08
05
display.
®
91