wissner-bosserhoff sentida 7-i Manual De Instrucciones página 113

Power-Box
Electrical connection
Type of protection
Protection class
Operating time
Power consumption
Height adjustment motors
Electrical connection
Type of protection
Protection class
Operating time
Adjustment speed
Pressure force
Patient surface motors
Electrical connection
Type of protection
Protection class
Operating time
Adjustment speed
Pressure force
CMC-Box
WLAN connectivity
Frequency
Encryption
Ethernet port
Protocols
230 V/50 Hz
IPX4
II
INT 2 min./18 min.: The equipment is not intended for
continuous operation. After 2 minutes of operation at full
load, a break of 18 minutes is recommended.
up to approx. 280W
24 V DC
IPX4
III
INT 2 min./18 min.: The equipment is not intended for
continuous operation. After 2 minutes of operation at full
load, a break of 18 minutes is recommended.
approx. 5.4 mm/sec.
max. 6000 N
24 V DC
IPX4
III
INT 2 min./18 min.: The equipment is not intended for
continuous operation. After 2 minutes of operation at full
load, a break of 18 minutes is recommended.
10 – 14 mm/s
max. 3000 N - backrest motor with emergency lowering
max. 6000 N - backrest motor without emergency lowering
(optional)
max. 6000 N - thigh rest motor
802.11 b/g/n
2,4 GHz
WPA2
10/100 MBit/s
IPr4 TCP
113