Careboard - wissner-bosserhoff sentida 7-i Manual De Instrucciones

Before you adjust a position of the low nursing bed sentida 7-i with the handset, you have to
activate the handset with the GO safety button. It is the green button with the button symbol.
▪
Activate the handset with the GO safety button
The handset is now activated. It automatically switches off after 3 minutes without
having to press the button.
As long as the membrane keyboard is illuminated, the handset is activated and you can adjust
all released electrical functions.
In the upper gray area, you can adjust the leg rest on the left and the backrest on the right.
In the orange-colored field below, you can adjust the height on the left and the auto contour
on the right.
▪
Press the corresponding button in the gray or orange-colored field to adjust a position.
▪
Deactivate the handset on the CareBoard
This way, you avoid unintentional misuse.
There is a LED light integrated into the handset.
▪
If you want to switch on the LED light on the handset, press the corresponding button in the
lower area of the handset.

6. CareBoard

The CareBoard provides access to all technical adjustment options of the low nursing bed.
®
Safety-Go button
Emergency stop
Autom. electr.
Trendelenburg
Autom. electr.
CPR
Battery symbol
®
Power supply
after you have adjusted the required position.
®
Touch monitor
83