Descargar Imprimir esta página

Technoline WS 9910 Manual Del Usuario página 25

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 51
3.
Press ALARM button once and minute digit will be flashing. User
shall then press + button to set the minute.
4.
Press ALARM button once to confirm the setting.
5.
To activate/ deactivate the alarm function, press the ALARM
button once. The display of the alarm icon represents that the
alarm is "ON".
Note: The duration of alarm sounding is 85 seconds
Activate the snooze function and stopping the alarm:
1.
When the alarm is sounding, press the MIN/MAX RESET key to
activate the snooze function. The alarm will stop and re-activate
after the snooze interval of 10 minutes.
2.
To stop the alarm completely, press any keys other than the
MIN/MAX RESET key.
Weather forecast and tendency
Weather forecast icons:
There are 3 weather icons in the third section of LCD which can be
displayed in any of the following combinations
Sunny
For every sudden or significant change in the air pressure, the weather
icons will update accordingly to represent the change in weather. If the
icons do not change, then it means either the air pressure has not
changed or the change has been too slow for the weather station to
register. However, if the icon displayed is a sun or raining cloud, there
will be no change of icon if the weather gets any better (with sunny
icon) or worse (with rainy icon) since the icons are already at their
extremes.
The icons display weather forecasts in terms of getting better or worse,
and not necessarily sunny or rainy as each icon indicates. For
example, if the current weather is cloudy and the rainy icon is displayed,
Cloudy
EN8
Rainy

Publicidad

loading