Publicidad
Idiomas disponibles
Idiomas disponibles
Note:
When the 868MHz signal is received correctly, do not re-open the
battery cover of either the temperature sensor or weather station, as the
batteries may spring free from the contacts and force a false reset.
Should this happen accidentally then reset all units (see Setting up
above) otherwise transmission problems may occur.
The transmission range is about 100 m from the temperature sensor to
the weather station (in open space). However, this depends on the
surrounding environment and interference levels. If no reception is
possible despite the observation of these factors, all system units have
to be reset (see Setting up).
Low battery indicator
Low battery indicator is displayed on the LCD when the batteries
require changing.
Positioning the weather station
The weather station may be hung onto wall easily or free standing.
To wall mount
Choose a sheltered place. Avoid direct rain and sunshine.
Before wall mounting, please check that the outdoor temperature values
can be received from the desired locations.
1.
Fix a screw (not supplied) into the desired wall, leaving the head
extended out the by about 5mm.
2.
Remove the stand from the Weather Station by pulling it away
from the base and hang the station onto the screw. Remember to
ensure that it locks into place before releasing.
Free standing
With the foldout stand, the weather station can be placed onto any flat
surface.
Positioning the temperature sensor:
The temperature sensor is supplied with a holder that may be attached
to a wall with the two screws supplied. The sensor can also be position
on a flat surface by securing the stand to the bottom to the sensor.
EN11
Publicidad
