Program Type (Pty) - Sony AIWA CDC-R937 Instrucciones De Manejo

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
Tuning in to an EON*, Traffic Program
(TP)
The unit automatically switches to FM reception and
tunes in to an EON, traffic announcement program when
the program starts.
* EON: Enhanced Other Network
1
Press TA during FM reception to activate TP function.
"TP" appears on the display.*
During reception, "TA" appears on the display.
* "TP" flashes when the unit cannot receive TP data.
To turn off TP function, press TA.
"TP" disappears.
Setting the volume of TP reception
When TP function is activated, the traffic announcement
program is tuned in at the volume set in the following
procedure regardless of the volume of the other source
at the time TP function is activated.
1
Press and hold AF until "BOOST 40" appears on the
display.
"BOOST 40" disappears approx. 5 seconds later.
2
Press + or - to select a volume level (0 to 80 in
increments of 5).
3
Press SEL.
Activating AF function and TP function at the
same time
1
Press AF, and then press TA.
"AF" and "TP" appear on the display.
Notes
• During MW or LW reception, the unit will not
automatically tune in to a traffic announcement
program. Be sure to select "
"AUX IN" to activate TP function.
• When the unit tunes in to a traffic announcement
program by way of TP function, you can increase the
volume, but cannot decrease it.
• When the traffic announcement program finishes, the
unit automatically returns to the previous state.
/
/
," "CD," or
Tuning in to a station by specifying a

Program Type (PTY)

1
Press and hold TA until "PRO-TYPE" appears on
the display.
"PRO-TYPE" disappears approx. 5 seconds later.
2
While "PRO-TYPE" is displayed, press one of the
preset station buttons* for more than 0.5 seconds to
select a Program Type.
The unit starts to search for a station of the selected
Program Type and tunes in to the station.
* The Program Types are assigned to the preset station
buttons as follows:
Preset station button
1
2
3
4
5
6
Changing the Program Types assigned to
preset station buttons
You can assign one of the following Program Types to
each preset station button.
NEWS, AFFAIRS, INFO, SPORT, EDUCATE,
DRAMA, CULTURE, SCIENCE, VARIED, POP M,
ROCK M, EASY M, LIGHT M, CLASSICS, and
OTHER M
1
Turn off the unit.
2
Press and hold TA until "PRO-TYPE" appears on
the display.
3
While "PRO-TYPE" is displayed, press + or - to
select the desired Program Type.
4
While the selected Program Type is displayed, press
a desired preset station button for 2 or more seconds.
Adjusting the clock by Clock Time (CT)
service
The unit adjusts the clock automatically according to the
CT data sent from a currently tuned-in RDS station.
1
Press and hold TA, and then press AF during FM
reception until "CT" appears on the display.
2
Press + or - to select "ON."
The clock is adjusted.
To turn off CT function, select "OFF" in step 2.
Program Type (default)
NEWS
SPORT
EDUCATE
SCIENCE
ROCK M
CLASSICS
ENGLISH
6

Publicidad

Tabla de contenido
loading

Tabla de contenido