Cd Player Operation - Sony AIWA CDC-R937 Instrucciones De Manejo

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
Notes
• In the following cases, the clock will not be adjusted:
— The tuned-in signal is too weak to activate this
function.
— The tuned-in station is not sending CT data.
• The clock may not always be correct even when CT
function is on.
Tips and other information
Presetting Alternative Frequency (AF) stations
automatically
Only the strongest frequencies among the AF stations
that are broadcasting the same program are selected
and assigned to each preset station button.
1
During FM reception, make sure that "AF" and/or
"TP" appear(s) on the display (see "Tuning in to
Alternative Frequency (AF) stations" and "Tuning in
to an EON Traffic Program (TP)").
2
Press and hold PS/A.ME until Auto Memory for AF
stations starts.
Displaying a Program Service (PS) name
You can check the name of currently tuned-in station on
the display. When the unit is tuned in to an RDS station
sending PS data, the station name appears on the
display.
Note
In the following cases, the station name will not appear
on the display:
— The tuned-in signal is too weak to activate this function.
— The tuned-in station is not sending PS data.
Notes on emergency broadcasts
• The unit automatically switches to FM reception and
tunes in to emergency broadcast when it starts. When
the broadcast finishes, the unit automatically returns
to the previous state.
• Be sure to turn on AF function and TP function to
receive emergency broadcasts.
• During MW or LW reception, the unit will not tune in
to the urgent broadcast.
7
ENGLISH

CD PLAYER OPERATION

Playing a CD
You can play CDs, CD-Rs and CD-RWs using the
procedure described below.
r/t
SRC(SOURCE)
INT
1
Press z to open the front panel.
2
Insert a CD.
The front panel will be closed automatically and
"DISC" appears on the display.
CD play starts.
If a CD is already inserted, press SRC (SOURCE)
repeatedly to select CD play mode.
In normal play, when the last track finishes, the unit
returns to the first track and continues to play.
Labeled-side up
CD indicator
Track number
To
Eject a CD
Skip to the next track
Go back to the beginning
of the current track
Each extra press skips
backward one extra track
Locate a specific point in
a track
* When you remove the CD, the front panel will be
closed automatically after a while.
To close the front panel manually, press the panel
upward.
EJECTz
REP1 SHUF
Elapsed playing time
Press
z*
t
r
Press and hold r or
t until you find the
point.

Publicidad

Tabla de contenido
loading

Tabla de contenido