Sinbo SHD 7013 Manual Del Usuario página 6

SINBO SHD 7013 HAIR BRUSH
INSTRUCTION MANUAL
Dear Customer.
Please read this user manual carefully before using your curling brush, paying particular
attention to the safety notes on this and the following page! Keep the user manual safe
for future reference and also to pass on to any subsequent owner.
TECHNIC DATA:
Type: SHD 7013
• 0-1-2 heat setting
• Brush roll off feature
• 360 degree swivel cable
• Hanging loop
• Single voltage
• AC230V, 50Hz, 400W
HOW TO USE
1. Separate a section of hair .spread the hair evenly around the brush and wind back to
the roots .hold in place for approximatly 10 seconds according to the thickness of the
lock of hair.2
2. Press the brush rotated button and hold it down to rotate the brush. Contrarily ,the
brush is fixed.
SAFETY CAUTIONS:
1. Do not block the air intake or outlet areas during use. Blocking the air
flow can result in overheating which may cause burns or mechanical
damage.Rolling too large a bunch of hair around the brush will not allow
proper curling and also block the air outlet
2. If the air intake is blocked by the hand during use,for example,the thermal switch may
function and turn off the device.This does not mean the device has been damaged and
it should shortly return to normal.However,repetition of this sequence can result in
damage.
3. When the styler is switched on,do not leave it near bedding,paper or other combustible
objects.Also,do not use the styler near gas or other highly combustible items.
4. Avoid dropping or subjecting the device to excessive shock.Do not pull the cord with
unnecessary force.
5. After use,switch the styler off then unplug the cord from the receptacle.
6. Wipe the housing clean with neutral detergent.Do not use thinner or benzine.Do not
directly apply hair oils or lotions to the brush or comb.(Indirect contact from the hair is
permissilbe.) Do not store near such cosmetics as they may deform the housing,comb
and brush.
ENGLISH
- 5 -