Tool Lubrication; Troubleshooting; Corrective Action - Bosch 4310 Instrucciones De Funcionamiento Y Seguridad

Tabla de contenido

Idiomas disponibles

BM 2610012089 03-10 E:BM 2610012089 03-10 E 3/30/10 7:42 AM Page 38

Certain cleaning agents and sol-

C UTION

vents damage plastic parts. Some

of these are: gasoline, carbon tetrachloride, chlori-

nated cleaning solvents, ammonia and household

detergents that contain ammonia.

Care of Blades

Blades become dull even from cutting regular lum-

ber. If you find yourself forcing the saw forward to

cut instead of just guiding it through the cut, chances

are the blade is dull or coated with wood pitch.

When cleaning gum and wood pitch from blade, un-

plug the saw and remove the blade. Remember,

blades are designed to cut, so handle carefully. Wipe

the blade with kerosene or similar solvent to remove

the gum and pitch. Unless you are experienced in

sharpening blades, we recommend you do not try.

pROBlEM

Brake does not stop blade

in about 5 seconds

Motor does not start.

Flash of light from motor end-

cap when switch is released.

Your Bosch tool has been properly lubricated and is

ready to use. It is recommended that tools with

gears be regreased with a special gear lubricant at

every brush change.

Periodically lubricate moving parts with a silicone, or

light oil spray. Do not use grease because it tends

to attract and hold sawdust.

All bearings in this tools are lubricated with a suffi-

cient amount of high grade lubricant for the life of

the unit under normal operating conditions. No fur-

ther lubrication is required.

Troubleshooting

Troubleshooting Guide - Electrical

CAUSE

1. Brushes not seated or lightly

sticking or worn.

2. Motor overheated from use

of dull blade/too heavy of a

blade, not recommended

accessory or rapid on/off

cycling.

3. Blade bolt loose.

4. Other

1. Check that unit is plugged in.

2. Power source fuse or

time delay fuse.

3. Brushes worn.

4. Handle not in usable position.

5. Other.

1. Normal - brake working

properly.

-38-