Brown 7/16" Large Head Screw - Sauder 418647 Manual Del Usuario

Step 10
Carefully turn your unit over onto its front edges and lay
å
the BACK (E) over your unit.
Make equal margins along all four edges of the BACK (E).
å
Push on opposite corners of your unit if needed to make
it "square".
Fasten the BACK (E) to your unit using four BROWN 7/16"
å
LARGE HEAD SCREWS (6S) along the bottom edge and
ten NAILS (1N) along the top and side edges.

BROWN 7/16" LARGE HEAD SCREW

(4 used along the bottom edge)
Page 14
6S
Notched edge
Caution
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
E
418647
NAIL
(10 used along the top and side edges)
www.sauder.com/services
1N