Scott ACTIFIT PRO II Manual Del Usuario página 5

Do not paint the back protector nor use colorants of any nature. SCOTT Sports SA shall not
accept complaints or replace protectors that have been used improperly.
• V. WARNING
No back protector can offer full protection against injury.
Spinal injuries will not be prevented by a back protector.
Any contamination, alteration to the back protector or misuse could dangerously reduce the
performance of the back protector.
The vest protector must be always used with the inserted protector.
• VI. INFO ON PRODUCT
CARE INSTRUCTION AND MATERIAL CONTENT
This product contains no known harmful substances: it is not known to undergo alteration from
contact with sweat or with substances likely to be found in toiletries and is not known to cause
any harm to human skin and body. The product does not contain any hazardous substances.
Find detailed material on the care label on your garment itself.
MARKING
The label is stitched onto the protector
SCOTT ACTIFIT PRO II BACK PROTECTOR & VEST PROTECTOR
SCOTT ACTIFIT PRO II BACK
PROT. & VEST PROTECTOR
M
| = 42-47 cm
1
Back protector plate EN 1621-2:2014
The vest protector must always be used
with the inserted protector!
Personal Protection Equipment (PPE) designed and manufactured to
provide limited protection against the risks of impact in the event of a fall
The label contains the following
SCOTT ACTIFIT PRO II
BACK PROTECTOR
/ /
M
M 42-47cm
FB 2 T-
Name of the model of the product
The CE marking ensures compliance with the essential
requirements of Directive 89/686/EEC
Icon indicates the specific sport in which the protector is
designed to be used: motorcycle, bike, wintersports
/
Protector size and additional body measurements and fit
The maximum length is measured between the waist to the
junction of the shoulder to the neck
Warning! The end user should carefully read the instruction
before using the product (PPE)
5 - ENGLISH