Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This tool is used for removing and installing of fuel injectors on BMW petrol engines N55. The tool is
to be used as BMW OEM 1300270.
More information regarding this item and a list of suitable engines and models can be found on our
website:
www.bgstechnic.com
SAFETY INFORMATIONS
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
•
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
Keep children and other persons away from the working area.
•
•
Do not allow children to play with this tool or its packaging.
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
•
Never place the tools on the vehicle battery. There is a risk of a short circuit.
Be careful when working on running engines. Loose clothing, tools and other objects can be
•
caught by rotating parts and cause serious injury.
•
Be careful when working on hot engines because of the risk of burn injuries!
Before starting repairs, secure the vehicle against accidental starting (remove the ignition key,
•
disconnect the negative pole of the battery).
•
Always be careful when working on fuel systems. The fuel in the fuel line may be under
pressure even when the engine is not running.
Release the pressure in the fuel lines before starting disassembly.
•
•
Bind any escaping fuel and dispose of the binder immediately (risk of fire).
•
Only work in well-ventilated rooms, do not inhale fuel vapors.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Fuel Injector Tool for BMW N55
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 62671
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
Tabla de contenido
