Seatpost - Orbea BLUE PAPER TERRA OMR 2022 Manual Tecnico

4 8 | O R B EA
SEATP O ST
OC SP-XP10 / SP-XP10-S SEATPOST
Terra OMR is designed to be used with 0mm offset seatposts, although it is compatible with 20mm offset
seatposts. Terra OMR is compatible with 27.2mm diameter seatposts.
MATERIAL
AVAILABLE DIAMETERS
AVAILABLE LENGTHS
(to saddle rails)
AVAILABLE OFFSETS
(Seatpost body)
5
1
MINIMUM INSERTION
SADDLE CLAMP
WEIGHT
with saddle clamp +/-5%
T ECHNI CAL M ANUAL
CARBON
27.2 mm
31.6 mm
27.2 mm: 350 mm, 400 mm
31.6 mm: 400mm
-
Offset 0 mm (SP-XP10): 27.2x350 mm
27.2x400 mm
31.6x400 mm
Offset 20 mm (SP-XP10-S): 27.2x350 mm +
3
2
350 mm = 90 mm
400 mm = 100 mm
SC03: Zero Offset
Round (Ø 7mm) and oval (7x9 mm) saddle rails compatible.
Tilt adjustment range: 20º
Offset 0 mm (SP-XP10): 27.2x350mm = 190gr
27.2x400mm = 200gr
31.6x400mm = 195gr
Offset 20 mm (SP-XP10-S): 27.2x350mm = 207gr
B LUE PAP ER T ERR A · O M R 2 0 22
SADDLE ANGLE ADJUSTMENT
1. Loosen the saddle clamp fixing bolt.
5 5
1 1
3. Tighten the saddle clamp fixing nut to the recommended torque setting
5
3
8 N.m
O RBEA | 4 9
2. Turn the tilt adjustment nut clockwise to lift the saddle
nose and counter-clockwise to lower it (20º total
adjustment range).
- -
+ +
3 3
2 2
20º total adjustment range
The final tilt adjustment will depend on the seat tube
angle of the frame the seatpost is installed on.
4 9
E N