Cisco NCS 560 Serie Manual Del Usuario página 12

Regulatory Compliance and Safety Information Regulatory Compliance and Safety Information Cisco NCS 560 Series Routers
Statement 1002 DC Power Supply
Warning
When stranded wiring is required, use approved wiring terminations such as closed-loop or
spade-type with upturned lugs. These terminations should be the appropriate size for the wires
and should clamp both the insulation and conductor.
Statement 1003 DC Power Disconnection
Warning Before performing any of the following procedures, ensure that power is removed from the DC
circuit.
Statement 1004 Installation Instructions
Warning
Read the installation instructions before using, installing, or connecting the system to the power
source.
Statement 1006 Chassis Warning for Rack-Mounting
and Servicing
Warning
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special
precautions to ensure that the system remains stable. The following guidelines are provided to
ensure your safety:
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or
Regulatory Compliance and Safety Information - Regulatory Compliance and Safety Information Cisco NCS 560 Series
Routers
6
with the heaviest component at the bottom of the rack.
servicing the unit in the rack.