Statement 1058-Power And Relay Connector; Statement 1064-Grounded Equipment; Statement 1071-Warning Definition - Cisco NCS 560 Serie Manual Del Usuario

Regulatory Compliance and Safety Information Regulatory Compliance and Safety Information Cisco NCS 560 Series Routers
Statement 1058 Power and Relay Connector
Warning When you connect or disconnect the power and/or alarm connector with power applied, an
electrical arc can occur. This could cause an explosion in hazardous area installations. Be sure
that all power is removed from the switch and any other circuits. Be sure that power cannot be
accidentally turned on or verify that the area is nonhazardous before proceeding.
Statement 1064 Grounded Equipment
Warning This equipment is intended to be grounded to comply with emission and immunity requirements.
Ensure that the switch functional ground lug is connected to earth ground during normal use.
Statement 1071 Warning Definition
Warning
IMPORTANT SAFETY INSTRUCTIONS
Before you work on any equipment, be aware of the hazards involved with electrical circuitry
and be familiar with standard practices for preventing accidents. Read the installation instructions
before using, installing, or connecting the system to the power source. Use the statement number
provided at the end of each warning statement to locate its translation in the translated safety
warnings for this device.
SAVE THESE INSTRUCTIONS
Regulatory Compliance and Safety Information - Regulatory Compliance and Safety Information Cisco NCS 560 Series
Routers
12