Burda RELAX GLASS IP65 Instrucciones De Montaje página 21

Wall-mounted installation (BRELG1200/R, BRELG1500/RD, BRELG1800/RD, BRELG2200/RD, BRELG3000/RD)
Correct Installation
* for 1200W / 1500W / 1800W, # for 2200W / 3000W
Minimum clearances when mounting the heater on A VERTICAL WALL.
Installation Process
WARNING! Mounting of the infrared heater and its connection to the electric mains should be carried out only by
qualified specialists according to the Electrical Installation Regulations and Power System Safety Standards.
1. Open the factory package and carefully take the heater out.
2. Take out the packing paper sheet from the end of heater
3. Take out one pair of mounting Brackets. These adjustable brackets allow direct ceiling or wall mount, and come with
preset angle options of parallel, 15°, 30°, 45° and height 165mm.
4. T
he correct installation process, as per the diagram above, select the heater location on the ceiling by locating the
stud or structural beams to ensure secure fastening of the heater, whilst observing the minimum clearances from the
floor and other objections.
5. Install two brackets on the ceiling or wall with the following minimum recommended bracket distance "B".
21