TROUBLESHOOTING
Possible malfunctions are given in Table below.
SYMPTOM
Will not heat / No operation indicator
Heater smells when first used.
Faint smell for short periods after turning on
the heater
Heater smells when turned on after periods
of no use
Clinking noises when heater is turned on and
after being turned off
Poor heating performance
There is a burning smell and or strange
sounds (other than normal expansion and
contraction noises) coming from the unit
When associated circuit breaker (safety,
ground) is thrown or a fuse is blown
Poor heating performance
Packaging
Packaging materials are chosen with consideration to environment and are therefore recyclable.
Handling of product at end of working life
The symbol left implies this product may contain substances necessary for functionality of product but
potentially dangerous for the environment. The product should not be disposed mixed with general
household waste but delivered to a designated collection point for environmental recycling. Please contact
local authority for further details of your nearest designated collection point.
CAUSE
Check that power is connected and switched on
This is caused by oil or dust left over from the manufacturing process
and will stop after a short time
This is normal and should stop after a short time
Build-up of debris and dust on the heater, Switch the heater off and
allow it to cool down and then clean
This is expansion and contraction noises of the heaters metal
components and is normal
Exposure to extreme ambient conditions such as high winds /
excessively cold temperatures can lower the heating performance of
an outdoor installation
Unit is not installed in correct position, possibly too high or heater is
too small for recommended area.
Turn off the heater, and contact seller.
Turn off the heater, and contact your authorized electrical installer
Incorrectly sized installation, contact your authorized electrical
installer
Faulty heater element, turn off the heater, and contact seller
24