Technical Data - OHAUS 8000 Serie Guia Del Usuario

5. MAINTENANCE
5.1 Cleaning
WARNING: Electric Shock Hazard. Disconnect the equipment from the power supply before cleaning.
Make sure that no liquid enters the interior of the instrument.
Attention: Do not use solvents, harsh chemicals, ammonia or abrasive cleaning agents.
The exterior surfaces of the instrument may be cleaned with a cloth dampened with water and a mild detergent.
5.2 Troubleshooting
For technical issues contact an Authorized Ohaus Service Agent. Please visit our website www.ohaus.com to locate the
Ohaus office nearest you.

6. TECHNICAL DATA

POWER SUPPLY
OPERATING TEMPERATURE
DISPLAY DIVISIONS
APPLICATION SOFTWARE
Note: Please visit www.ohaus.com for detailed technical instruction and application manuals.
7. COMPLIANCE
Compliance to the following standards is indicated by the corresponding mark on the product.
Mark Standard
This product complies with the applicable harmonized standards of EU Directives 2011/65/EU (RoHS),
2014/30/EU (EMC), 2014/35/EU (LVD) and 2014/31/EU (NAWI). The EU Declaration of Conformity is
available online at www.ohaus.com/ce.
This product complies with the EU Directive 2002/96/EC (WEEE). Please dispose of this product in
accordance with local regulations at the collecting point specified for electrical and electronic equipment.
For disposal instructions in Europe, refer to www.ohaus.com/weee.
12 Vdc (8 - 24 Vdc in the IO versions), with internal 100 - 240 Vac (50 - 60 Hz) / 12 Vdc
adapter.
From -10 to +40 ° C.
10000e, 3 x 3000e for legal for trade weighing, expandable up to 1 000 000d for general
use (with minimum signal coming from the 1.6 mV/V cell).
Accumulation and Formula Weighing, Parts Counting, Weighbridges, SQC, Vehicle
Weighing, Price Computing and Industrial Labeling, Single Product Dosage systems, Multi-
component dosage systems
Note: Indicator is shipped with standard software only.
Please go to dmx.ohaus.com to download the application software.
EN-9