Technical Data - OHAUS Defender 6000 Guia Del Usuario

EN-8
4. MAINTENANCE
CAUTION: DISCONNECT THE UNIT FROM THE POWER SUPPLY BEFORE CLEANING.
4.1 Cleaning
WARNING: Electric Shock Hazard. Disconnect the equipment from the power
supply before cleaning.
Make sure that no liquid enters the interior of the instrument.
Attention: Do not use solvents, harsh chemicals, ammonia or abrasive cleaning
agents.
The housing may be cleaned with a cloth dampened with a mild detergent if necessary.
4.1.1 Cleaning for i-DT61PW Model

The housing may be cleaned with a cloth dampened with a mild detergent if necessary.

Do not use solvents, chemicals, alcohol, ammonia or abrasives to clean the housing or the control panel.
4.1.2 Cleaning for i-DT61XWE Model

Use approved cleaning solutions for the stainless-steel Indicator housing and rinse with water.
Dry thoroughly.

Do not use solvents, chemicals, alcohol, ammonia or abrasives to clean the control panel.

5. TECHNICAL DATA

Materials
I-DT61XWE Housing: stainless-steel 316
I-DT61PW Housing: polycarbonate (PC)
Display window: polycarbonate (PC)
Keypad: polycarbonate (PC)
Equipment Ratings:
Indoor use only
Altitude:
Operating temperature:
Humidity:
Electrical supply:
Voltage fluctuations:
Overvoltage category
(Installation category):
Pollution degree:
Indicator Model
Maximum displayed resolution
Maximum approved resolution
Maximum counting resolution
2000m
-10° C to 40° C
maximum relative humidity 80% for temperatures up to 31 ° C decreasing linearly
to 50% relative humidity at 40° C.
100 - 240V～, 0.5A, 50/60Hz (i-DT61PW); 6 x D alkaline battery (i-DT61XWE).
Mains supply voltage fluctuations up to ± 10% of the nominal voltage.
II
2
TABLE 1 SPECIFICATIONS
i-DT61PW
1:75,000
1:10,000
1:1,500,000
Defender 6000 Indicators
i-DT61XWE