Publicidad
6. Determine the appropriate location within a sidewall
pillar of the pickup box for the extension harness's 7-way
connector (fig. 3A). The connector must be mounted within
reach of the trailer's 7-way connector, and must not pinch
or otherwise bind when turning.
Caution: Ensure the harness connector routed forward
in step 6 is within reach of the desired 7-way connector
location.
Warning: Do not mount the
7-way connector into the floor
of the pickup bed as moisture
could collect in the socket and
damage the vehicle's wiring
system.
7. Using a hole saw, drill a 2
the sidewall pillar (Fig. 3).
Caution: Take care not to drill through the body or
any exposed surface.
8. Using a file, smooth the edges of the hole to prevent
abraision of the harness or connector.
9. Route the extension haness connector up from under
the body throught the hole drilled in step 8. Insert the
harness connector into the rear of the provided 7-way
socket, pressing together firmly to engage the locking tab.
10. Position the supplied 7-way connector into the opning
and using the connector as a template, drill four 7/64"
mounting screw holes.
A
⁄
" hole in the desired location in
1
8
Fig 3
Publicidad
