Uline H-9234 Instrucciones De Montaje página 3

b. Align placement hole in the crown with hole in
rafter and insert pin. (See Figure 6)
Figure 6
Placement
Hole
c. Remove alignment hole pins where hip rafters (HR)
are attached to crown. (See Figure 7)
Figure 7
4. Repeat steps 3b-3c to connect four full
rafters (FR) to the 8-way crown. (See Figure 8)
Figure 8
FR
HR
FR
PAGE 3 OF 24
ASSEMBLY CONTINUED
HR
FR
HR
FR
HR
5. Beginning at a corner fitting, attach eave poles (EV)
to corner fittings and 4-way side tee fittings, working
clockwise around the assembly. Attach to hip
rafters (HR) and full rafters (FR). (See Figures 9-10)
Figure 9
EV
Figure 10
6. Loop end of each ratchet strap to fitting at each
leg location. (See Figure 11)
Figure 11
HR
EV
Ratchet
Strap
FR
0721 IH-9234