Sinbo SHD7017 Manual Del Usuario página 14

All manuals and user guides at all-guides.com
ATTENTION
momentary smoking while this coating is initially heated. This represents no danger to
the user and does not indicate a defect in your curling iron. When using for the smoke
dissipates. This should last only about 30 seconds.
Getting Started
Your appliance heats up very quickly and the temperature remains stable throughout
use:
(1) Plug the device in.
(2) Turn switch to the "ON" position.
(3) Wait for just 1 minute, your appliance is ready to use.
(4) After use, turn switch to the "OFF" position, unplug the appliance.
(5) Allow hair to cool down.
Operation:
Your hair must be dry (or slightly damp), clean and tangle free to avoid damaging it.
Do not use the appliance on synthetic hair (wigs, extensions, etc.)
Specification:
* 2-in-1 hair straightener /crimper
* Ceramic coating plate
* High temperature: 200 C degree
* 360° swivel cable
* Switch on/off with light
* Convenient transform button
* AC230V, 50Hz 40W
* Straightening function
(1) Open up the straightening plates by using the function selector switch.
(2) Take a small lock of hair a few centimeters wide, comb it and place it between the
plates.
(3) Close the plates firmly and slide the appliance slowly down the length of hair from
the root to the tip of the hair.
(4) The ceramic coating of the plates protects your hair against excessive temperatures,
by distributing the heat in a uniform manner.
(5) Wait until your straightened hair has cooled down before styling it.
* Curling function
(1) Close the straightening plates to obtain the curling iron function, using the function
selector switch.
(2) Form a lock of hair 2 to 3 cm wide.
(3) Open the grip by pressing down on the lever and slip the tip of your hair between the
tube and the grip.
- 13 -