TESY MC 20111 Manual De Operación página 3

appliance safety.
• If you decide to stop using such kind of appliance,
it is advisable to render it unusable by cutting its
power cord after disconnecting it from the mains.
It is advisable all possible dangers related to the
appliance to be prevented, especially in relation to
children that may play with out-of-use appliances.
• Never keep the appliance unnecessarily switched
on. Disconnect it from the power socket when you
do not intend to use it for a long period of time.
• Warning: Do not use this appliance with a
programming device, counter or any other device
which can automatically switch it on, because if the
appliance is covered or improperly positioned this
may cause fire.
• Position the power cord in such a way that it does
not obstruct the free movement of people and
cannot be stepped on! Use only approved extension
cords which are suitable for this appliance, i.e. have
got a conformity sign!
• Never move the appliance by pulling its power cord
and do not use the power cord for carrying objects!
• Do not bend the power cord and do not stretch it
over sharp edges, do not position it over hot plates
or open flames!
• Never use this appliance in close proximity to
wet premises – bathroom, a shower cabin or a
swimming pool!
PACKING
• After unpacking the appliance, check if all its
elements are included in the packing and that it has
not been damaged during transportation! In case
damage or incomplete delivery is found, contact
your authorized retailer!
• Do not throw away the original packing! It could
be used for storage and transportation purposes in
order to avoid damages during transportation!
• Disposal of packing materials should be done in
the appropriate way! Children should be prevented
from playing with polyethylene bags!
INSTALLATION AND OPERATIONS INSTRUCTIONS
Indoor use only
You need to install the provided rollers by stucking
them under the base. (The installation of the rollers does
not need any tool, only by hands, see below picture)
English
Important! Never use the heater without its rollers
correctly in position!
1. Fix the caster into the feet mounting hole(Figure 1).
Figure 1
Fix the 2 feet into the bottom groove of the radiator,
double check the R&L distinguish (Figure 2).
Figure 2
2. Install the provided handle at the back of the
appliance by fixing the two screws as shown (Figure 3)
with 2 screws of 4*14 is fixed into the correspond hole.
Figure 3
Thank you for choosing panel heater MC 20111. This is a
product providing heating in winter depending on the
consumers' needs for comfortable room temperature. If
operated and taken care of properly in accordance with
these instructions, the appliance will provide you with
many years of useful operation.
USE
This appliance can be operated by the manual controls
located on the side of the heater:
Usage and Storage Instructions
EN
3