TESY MC 20111 Manual De Operación página 4

EN
Switch
Тhermostat
anti-frost position
1. Power button
There are four different positions.
• Stop: 0
• Low heating: 750W
• Medium heating: 1250W
• Maximum heating: 2000W
2. Adjustable thermostat
• The appliance is equipped with thermo-regulator
sensitive to ambient temperature. You can turn
thermo-regulator knob until the desired room
temperature is achieved (the size of the heated
room has to conform to the power of the appliance;
in case the desired room temperature can not be
achieved, an additional panel heater needs to be
operated). You may turn thermostat knob clockwise
to maximum level (HI) and when the desired room
temperature is achieved you have to turn the switch
counter-clockwise slowly until a "ticking" sound
is heard. After that the appliance will maintain
the room temperature at the adjusted level by
switching on and off automatically.
• The appliance has got an in-built anti-frost function.
In case you decide to use the appliance in a room,
where minimum temperature is to be maintained
(winter gardens, cellars or attics), the appliance
has to be adjusted to the desired heating level
(level I, level II or both), the thermostat knob has
to be turned counter-clockwise until it reaches
the smallest indicator reading. In this position
the appliance will maintain room temperature in
the range of 5±2°С – i.e. it will periodically switch
on and off, maintaining the adjusted level of
temperature comfort in the room.
• The available power levels are presented
indicatively.
4
Usage and Storage Instructions
Note: The device shows the temperature around the
location of the sensor and is not a means of accurately
measuring the ambient temperature.
MOVING OF THE APPLIANCE:
If the appliance has to be moved, switch it off by
the Heater switch and if a fan is available in your
appliance switch it off by the Fan switch. Take the
power plug out of the power socket, holding the
appliance handles with both hands, move it to its
new position, having in mind that the appliance must
get cold (cooled down) before doing this. Moving
hot appliances may lead to undesired consequences
for the user like burns or entering of inflammable
materials entering the panel heater during its
movement.
IN-BUILT OVERTURN (FALL) PROTECTION SWITCH
The panel heater has got an in-built overturn protection
switch. In case the panel heater overturns, the power
supply will be stopped. Let the panel heater cool down
and then put it into upright position again. The appliance
will restore its normal operation.
AUTOMATIC SAFETY STOP
There is an in-built device in the panel heater (self-
restoring thermal switch), which actuates automatically
and switches off the panel heater in case of overheating.
The thermal switch will restore its normal state when the
appliance temperature decreases to its normal level.
Important!
It is possible during initial operation of the appliance a
specific odour to be emitted. This is normal at the initial
period of operation. Ensure that the panel heater is used in a
well-ventilated room and let it work until the odour
disappears.
You may hear a specific sound resembling popping until the
panel heater warms up. This is normal and the panel heater
operates in normal mode. As soon as the panel heater warms
up this sound will disappear.
CLEANING
• It is compulsory first to switch off the appliance and
disconnect its power cord from the socket. Before
starting cleaning the panel heater you should wait
until it cools down after disconnecting it from the
power socket.
• Clean the body of the appliance with a damp cloth,
vacuum cleaner or soft brush.
• Never immerse the appliance into water – there is
danger to your life from electric shock!
• Never use petrol, thinner or coarse abrasive
products for cleaning because they will damage the