Introduction - Deltafox DG-ECS 2240 Traducción Del Manual De Instrucciones Origina

Content
Introduction ..........................................31
Intended purpose ................................32
General description .............................32
Extent of the delivery......................... 32
Overview ........................................... 32
Function description .......................... 33
Technical Data .....................................33
Notes on safety ....................................33
Symbols used on the saw ................. 34
Symbols used in the instructions....... 35
General notes on safety .................... 35
General safety instructions for
power tools ........................................ 35
Causes and operator prevention
of kickback ........................................ 39
Residual risks .................................... 40
Further safety directions.................... 40
Safety functions................................. 40
Assembly..............................................41
Mounting the saw chain and blade.... 41
Tensioning the saw chain .................. 41
Chain lubrication ............................... 42
Operating the chainsaw ......................43
Switching on ...................................... 43
Checking the chain brake.................. 43
Checking the chain lubrication .......... 44
Changing the saw bar ....................... 44
Sawing techniques ..............................44
General ............................................. 44
Felling trees....................................... 44
Limbing.............................................. 46
Bucking ............................................. 46
Maintenance and cleaning ..................47
Cleaning ............................................ 47
Maintenance intervals ....................... 48
Maintenance Interval Table ............... 48
Oiling the saw chain .......................... 48
Sharpening the saw chain ................. 49
Adjusting the chain tension ............... 50
Starting up a new saw chain ............. 50
Maintaining the chain bar .................. 50
Turn the chain bar ............................. 50
Storage .................................................50
Waste disposal and
environmental protection ...................51
Replacement parts/accessories .........51
Guarantee .............................................51
Trouble shooting .................................52
Repair Service......................................52
Translation of the original
EC declaration of conformity ...........220
Exploded Drawing .............................229
Service Centre ...................................231

Introduction

Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product. During production,
this equipment has been checked for
quality and subjected to a final inspec-
tion. The functionality of your equipment
is therefore guaranteed. It cannot be ruled
out that residual quantities of water or
lubricants will remain on or in the equip-
ment/hose lines in isolated cases. This is
not a fault or defect and it represents no
cause for concern.
The operating instructions con-
stitute part of this product. They
contain important information on
safety, use and disposal.
Before using the product, familiar-
ise yourself with all of the operat-
ing and safety instructions. Use
the product only as described
and for the applications specified.
Keep this manual safely and in the
event that the product is passed
on, hand over all documents to the
third party.
GB
31