Cameo AUROBEAM 150 Manual De Usuario página 16

Red = red LEDs
Green = green LEDs
Blue = blue LEDs
White = white LEDs
Strobe = Strobe Effect
As soon as the desired number of scenes (up to 10 different scenes) has been created, you can use them to compile
the user program (User). Using the arrow buttons, select the menu item "Advanced.Set" (dark background) and confirm
by pressing ENTER. The display now shows "Edit Scenes" and "Edit Program". Select "Edit Program" using the arrow
buttons and confirm with Enter. Also using the arrow buttons, you can now select the duration of the scenes (Hold
Time) and the 10 available steps (Step 1 - Step 10) one at a time, in order to create the user program. Assign each of
the 10 steps to a scene by selecting a step, confirm with ENTER and determine a scene (Scene00 - Scene10) by means of the + and - buttons for
the respective step. Confirm with ENTER. Scene 00 (Scene00) cannot be changed and is used to skip the corresponding step in the current program.
This allows the user program to consist of 2 to 10 scenes.
Edit Program
Hold Time
Step 1 Scene00 - Scene10
Step 2 Scene00 - Scene10
Step 3 Scene00 - Scene10
Step 4 Scene00 - Scene10
Step 5 Scene00 - Scene10
Step 6 Scene00 - Scene10
Step 7 Scene00 - Scene10
Step 8 Scene00 - Scene10
Step 9 Scene00 - Scene10
Step 10 Scene00 - Scene10
To enable the user program (User), follow the instructions described in point D. SETTING OPERATING MODE.
L. MUSIC CONTROL (Sound)
Pressing the MODE button will take you to the selection menu for system settings. Using the arrow buttons, select
the menu item "Oper. Mode" (dark background) and confirm by pressing ENTER. The digits which show the operating
mode, change their colour to red, and you can use the arrow buttons to select the desired Music control mode (Sound). By pressing ENTER to
confirm, the microphone sensitivity can now also be adjusted with the help of the + and - buttons (Sen00 = minimum sensitivity, Sen99 = maximum
sensitivity). Confirm with ENTER and press the MODE button twice to return to the main display. Now the spot is controlled by the built-in microphone
and follows the beat of the music.
M. STATIC MODE (Static)
The static mode allows it, much like with a DMX control unit, to adjust all functions such as pan, tilt, strobe including
the Pixel Control directly on the device using values from 000 to 255. Thus, a scene can be created without an addi-
tional DMX controller. Pressing the MODE button will take you to the selection menu for system settings. Using the arrow buttons, select the menu
item "Oper. Mode" (dark background) and confirm by pressing ENTER. The digits which show the operating mode, change their colour to red, and
you can use the arrow buttons to select the desired static mode (Static). After you have confirmed with ENTER, the parameters can be selected using
the arrow buttons (see list). Press ENTER. The value of the parameter can now be changed using the + and - buttons. Confirm the input with ENTER.
Once all of the parameters have been set as required, press the MODE button several times to return to the main display.
Static
PAN = Pan Position
PAN-Fine = Pan Fine Adjustment
TILT = Tilt Position
TILT-Fine = Tilt Fine Adjustment
Strobe = Strobe Effect
StrobeSpd = Strobe Speed
Dimmer = Master Dimmer
Red1 = red LED Pixel 1
Green1 = green LED Pixel 1
16
000 - 255
000 - 255
000 - 255
000 - 255
000 - 001
002 - 255
000 - 255 = Duration of the scenes, short -> long
= Selection Scene00 - Scene10
= Selection Scene00 - Scene10
= Selection Scene00 - Scene10
= Selection Scene00 - Scene10
= Selection Scene00 - Scene10
= Selection Scene00 - Scene10
= Selection Scene00 - Scene10
= Selection Scene00 - Scene10
= Selection Scene00 - Scene10
= Selection Scene00 - Scene10
0 - 100%
0 - 100%
0 - 100%
0 - 100%
no function
Strobe speed 0 - 100%
000 - 255 0 - 360°
000 - 255
000 - 255 0 - 360°
000 - 255
000 - 063 no function
064 - 127 Stroboscope
128 - 191 Strobe Ramp Up
192 - 255 Random Strobe
000 - 255 0 - 100%
000 - 255 0 - 100%
000 - 255 0 - 100%
000 - 255 0 - 100%