Electrical Connection - Astralpool Mini Manual De Instalación Y Mantenimiento

ENGLISH
IMPORTANT: The instruction manual you are holding includes essential information on the safety measures to be
implemented for installation and start-up. Therefore, the installer as well as the user must read the instructions before
beginning installation and start-up.
Keep this manual for future reference.
To achieve optimum performance of the Projector Mini o Halospot RGB-DMX, follow the instructions provided
below:

1. ELECTRICAL CONNECTION

The projectors are supplied with a 2-wire 1.5mm2 Cu H07RNF cable.
This projector has been designed to operate only with a DMX control and with the DMX power supply (code
I0832DMXI52 and I0832DMXFEI52). It doesn't work with any other control system.
2. CONTROL SYSTEMS OF THE RGB-DMX LED PROJECTORS
Mini, Quadraled and Halospot Led projectors use 3 DMX channels, one to each one of three primary colours RGB (red,
green and blue). The configuration of DMX direction is realized from the DMX Power Supply code I0832DMXI52 or
I0832DMXFEI52. The Power supplies achieve to connect until a maximum of 60W for I0832DMXI52 and until 400W for
I0832DMXFEI52. The Power supply has 6 point outputs, which it is indifferent what of them are connected the projectors.
Internal power supply (P.Máx=60W)
External power supply (P.Máx=400W)
DMX IN/OUT
- +
+ - + - + - + - + - + -
OUTPUT FOR DMX PROJECTORS
DMX LINE
- +
TERMINATION
See manual of the DMX mains lead
code I0832DMXI52 for information
regarding how to assing DMX
addresses to each projector and
See manual of the DMX mains
lead code I0832DMXFEI52 for
information regarding how to
assing DMX addresses to each
projector and how to configure
24V DC
3
how to configure a system.
system.
a