Toshiba Express Port Replicator II Manual Del Usuario página 17

2 Turn off your computer.
3 Disconnect all cables/cords from your computer.
4 Connect your external devices to the appropriate ports on the
port replicator.
NOTE Do not connect a printer to the parallel port yet. To connect a printer
via the parallel port, see
page 24
NOTE
If you have not already configured your computer for network
communications, contact your LAN administrator to do so prior to
connecting the LAN cable to the port replicator. See
network" on page 19
5 Connect the included AC adaptor to the port replicator.
The supplied power cord conforms to safety rules and regulations in
the region where the product was purchased. Do not use the AC
adaptor that was included with your computer. Always use the
Toshiba AC adaptor that was provided with this product or use
Toshiba recommended alternate adaptors to avoid any risk of fire
and/or other damage to the computer and/or port replicator. Use of
an incompatible AC adaptor could cause fire and/or damage to the
computer and/or port replicator, possibly resulting in serious injury.
TOSHIBA assumes no liability for any damage caused by use of an
incompatible adaptor.
When you connect the AC adaptor to the port replicator, always
follow the steps in the exact order as described below. Connecting
the power cable to a live electrical outlet should be the last step,
otherwise the adaptor DC output plug could hold an electrical charge
and cause an electrical shock or minor bodily injury when touched.
As a general safety precaution, avoid touching any metal parts.
Setting up and using the port replicator
Setting up the port replicator
"Connecting a printer to the parallel port" on
after you have set up the port replicator.
for more information.
17
"Connecting to a