Maintenance And Care; English - Kärcher PS 20 Manual Del Usuario

Application
Attaching the extension tubes
Fasten the PS 20 to the high-pressure gun
using the extension pipes.
Illustration
 Connect the extension pipes and rotate
them by 90°.
 Tighten the safety cover.
 Press the extension pipe into the bayo-
net connection of the PS20 then turn by
90°.
 Tighten the safety cover.
Illustration
 Press the extension pipe into the bayo-
net connection of the PS20 then turn by
90°.
 Tighten the safety cover.
Cleaning floor surfaces
Illustration
 Place the PS 20 onto the surface to be
cleaned.
 Switch on the high pressure cleaner
and pull the lever of the high pressure
gun.
 Let the PS20 glide across the floor with-
out scrubbing.
Illustration
 Rotate the PS20 (in 45° steps) to clean
small crevices.
All manuals and user guides at all-guides.com
Always switch off the appliance and pull out
the mains plug before care and mainte-
nance work.
build up the pressure or is vibrating
Check and clean the built-in high pressure
nozzles of your PS 20.
Illustration
 Remove the clip.
 Remove the high pressure nozzles and
 Rinse the PS20 with clear water.
Illustration
 Install the high pressure nozzles.
 Re-insert the clip.
Always switch off the appliance and pull out
the mains plug before care and mainte-
nance work.
Use a moist cloth and clean the PS 20 after
use.
The PS 20 is maintenance-free.
Troubleshooting
Risk of injury
High pressure cleaner does not
clean them under flowing water.

Maintenance and care

Risk of injury
Care
Maintenance

English 7