Assembling Instructions; Install Lower Bar; Install Curved Handle; Installing The Grass Box - Grizzly Tools ARM 4038 Lion Set Traducción Del Manual De Instrucciones Original

GB
11 Battery charger
11a Display Battery charger
12 Back wheels
13 Collection bag
14 Rear impact protection
15 Cable holder
16 Connection cable l
17 On/Off button / Contact chip
18 Safety switch
19 Battery Indicator
20 Locknut
21 Blade

Assembling instructions

• Alwayas wear cut-protection gloves
• Undertake only work with which you
are confident.
• In case of uncertainty, contact a speci-
alist or contact our service directly

Install lower bar

1. Open the lower bar (4) and move it to
the desired inclination.
2. Fix the lower bar by means of the pre-
mounted quick-release levers (5).

Install curved handle

1. Fasten the curved handle (1) with the
nuts, the washers and the upper tigh-
tening levers (2) to the right and left of
the lower bar (4).
2. Clipping in the cable holders: Clip the
cable holders (15
bar to fixate the machine
cable (16 ).
If you loosen the quick release
levers, you can fold down the
26
) onto the lower
curved handle and the lower part
of the handle for storage of the de-
vice.

Installing the grass box

1. Loosen the Phillips screw (13a) on the
carrying handle (13b).
2. Place the carrying handle (13b) on
the upper side of the grass collection
box (13) and screw it tight with
a Phillips screw (13a) from below.
3. Place the plastic tabs (13c) over the
grass collection box rods (13d).
Attention: Do not operate the
appliance until the collision
guard and grass box are fully
installed. Risk of injury!

Initial Operation

Before operating the machine,you must
- install the upper and lower upper
handles:
- install the collection bag
Caution! Risk of injury! During
the assembly or disassembly of
the collection bag, the engine
must be turned off and all mo-
ving parts must have come to a
standstill. Remove the battery
from the device before carrying
out any work.

Operation

Caution! Risk of injury! Always
wear appropriate protective
equipment and work gloves
while working with the appli-
ance. Prior to each use, ensure
that the appliance is working