Indicator Charge Level; Charging Process; Insert/Remove Battery; Working With The Lawnmower - Grizzly Tools ARM 4038 Lion Set Traducción Del Manual De Instrucciones Original

GB
5. To switch on, press the power
switch (17) and hold it down
while pressing the safety
switch (18) against the bow-
type handle (1). Release the
power switch (17).
6. To switch the apparatus off, let
go of the security switch (18).
After switching off the equip-
ment, the blade continues to
turn for several seconds. Do not
touch the moving blade. There
is a risk of injury.

Indicator charge level

The remaining charge of the battery can
be viewed on the battery charge level in-
dicator (19) during operation. It is located
at the upper handle (1), facing the user.
The number of illuminated LED lights
shows the charge level of the battery.

Charging process

This battery-powered lawnmo-
wer is part of the Grizzly 40 V
range.
Other devices from this product
range can be operated with the
same batteries.
The following devices are
compatible:
- Cordless Hedge Trimmer
AHS 4055 Lion
- Cordless Lawn Trimmerr
ART 4032 Lion
- Battery-operated scythe
AS 4026 Lion
- Cordless chainsaw
AKS 4035 Lion
- Cordless leaf blower
28
- Cordless lawnmower
- Cordless lawnmower
- Battery scarifier
A B C D
K L M N

Insert/remove battery

U V W X
Switch off the device, pull the con-
tact chip (
blades to come to a stop. There is
a risk of personal injury.
1. To insert the battery (7) into the
2. To remove the battery (7) from

Working with the Lawnmower

Regular mowing encourages increased
foliation of the grass and kills off weeds at
the same time. Therefore, not only does
each mowing increase the density of the
lawn, it also produces an evenly resilient
lawn.
The first cut is to be made in around April,
at a growth height of 70 – 80 mm. In the
main vegetation period, the lawn is to be
mowed at least once a week.
• Run the equipment at a walking pace,
in tracks that are as even as possible.
For gap-free mowing, the tracks should
always overlap by a few centimetres.
• Adjust the cut height so the equipment
is not overloaded. Otherwise, the mo-
tor may be damaged.
ALS 4025 Lion
ARM 4046 A-Lion Set
ARM 4051 A Lion-Set
E F G H
ARV 4038 Lion-Set
O P Q R
Y Z
17) and wait for the
device, push the battery along
the guide rail into the device. It
locks into place audibly.
the device, press the release
button ( 7b) on the battery
and pull the battery out.
I J
S T