Kohler K-2205 Instrucciones De Instalación página 3

S For all installations: If the
countertop has not been
installed, install it at this time.
S Drill the faucet holes
according to the faucet
installation instructions.
S Install the faucet to the
countertop according to the
manufacturer's instructions.
S Install the drain to the
lavatory according to the
manufacturer's instructions.
NOTE: Do not use adhesives or
adhesive sealants.
S Apply a continuous bead of
quality sealant to the lavatory
rim where it will contact the
countertop.
NOTE: The screws provided
should be used on countertops
with a minimum 1" (2,5cm)
thickness. For
countertops, use appropriate
anchors and fasteners.
S For wood, wood composite,
and marble countertops,
install the lavatory to the
countertop with the clamps
and screws provided. For
other countertop materials,
refer to the countertop
manufacturer's instructions
for recommended fasteners.
S Position the lavatory squarely
under the cutout before
tightening the clamps. Draw
the lavatory rim up to the
countertop until it is snug. Do
not overtighten.
S Immediately wipe away any
excess sealant.
Kohler Co., Kohler, WI, U.S.A.
thinner
Anchor Screw
Wood Screw
3
Clamp
Apply
Sealant
B
1007252-2-