Service Information - Etac Immedia GlideCushion Instrucciones De Uso

Service information

Inspection
Thank you for choosing an Etac product. If the customer makes
adjustments, repairs or uses combinations not predetermined
by Etac, the Etac CE certification and Etac warranty will not be valid.
Warranty: Two-year warranty on material and manufacturing
defects, provided that the product is used correctly. Before
taking a product into service always conduct a risk assessment
according to national and/or local legislation.
First inspection:
• Is the packaging intact?
• Read the label on the packaging and check the article no.
and product description.
• Check that Short Instruction is enclosed – updated
User Manual/Instruction for use can be downloaded from
www.etac.com or contact Etac Customer Service or your
local distributor.
Visual inspection/Check the product:
Ensure that the materials, seams, stitching,
handles, buckles are intact/faultless.
Mechanical load or stress/Test handles:
Pull hard on the handles in opposite directions
and check the material, seams and stitching.
Test buckles:
Lock the buckle and pull in opposite directions,
check the buckle and the stitching.
Check
Manual transfer aids with handles, straps and buckles:
Manual transfer aids with high or low friction:
If in doubt, please contact Etac Customer Service or local
distributor for more information and guidance.
Class 1 - European Council
Directive MDD 93/42/EEC
on medical devices
All manuals and user guides at all-guides.com
•
Periodic Inspection:
•
•
•
Manual transfer aids for sitting and lying transfer:
For more information about training and the use of these
products, contact the Etac transfer experts – www.etac.com.
8
Check the label on the product - does it include article no.,
product description, lot/batch no., cleaning instructions
and supplier name?
Make sure that your Manual transfer system is always
in perfect condition.
After wash – always check materials, stitching, handles,
buckles.
If the product shows signs of wear and tear, it must
be removed from service immediately.
Stability test:
Try to bend the product and verify that it feels
firm, stable and solid.
Test low/high friction:
Place the product on a firm surface or a bed, place
your hands on the material and test the friction by
pushing your hands down into the product.
Low friction – slides effortlessly
High friction – no sliding/movement
The product can be
scrapped in accordance
with national regulations
Read the
User Manual