Service Information - Etac immedia 4WayGlide - midi Instrucciones De Uso

Service information

Inspection
First inspection:
• Is the packaging intact?
• Read the label on the packaging and check the article no. and product description
• Check that Short Instruction is enclosed – updated User Manual/Instruction for use can be downloaded from www.etac.com or contact your Etac
Customer Service or the local dealer.
• Check the label on the product - does it include article no., product description, lot/batch no., cleaning instructions and supplier name?
Periodic Inspection:
• Make sure that your Manual transfer system always is in a perfect condition.
• After wash – always check materials, stitching, handles, buckles.
• If the product shows signs of wear and tear, it must be removed from service immediately.
Visual inspection/Check the product:
Ensure that the materials, seams, stitching,
handles, buckles are intact/faultless.
Mechanical load or stress/Test handles:
Draw hard in the handles in opposite directions
and control the material, seams and stitching.
Test buckles:
Lock the buckle and draw in opposite directions,
control the buckle and the stitching.
Check:
Manual transfer aids with handles, straps and buckles:
Production year, month
and day
Stability test:
Try to bend the product verify that it feels firm,
stable and solid.
Test low/high friction:
Place the product on a firm surface or a bed,
place your hands on the material and test the
friction by pushing your hands down into the
product.
Low friction – slides effortlessly
High friction – no sliding/moving
Manual transfer aids with for sitting and lying transfer and
with high or low friction:
The product can be
scrapped in accordance
with national regulations
8
Read the
user manual