Clock Set - Alaris Medical Systems IVAC P7000 Manual Del Usuario

Configured Options

Clock Set

Clock Set is used to set the pumps internal clock.
1. Press the ON/OFF power button OFF.
2. Hold down the START button and press
the power button ON.
3. The main display will show "000". Enter the
Access Code "251" using the rate selection
arrows.
4. Enter the first digit and press NEXT
indicated on the screen.
5. When the complete code has been entered
press the OK softkey indicated on the
screen.
6. Select CLOCK SET using the chevrons
and press the OK softkey indicated on the
screen.
7. To adjust the value displayed use the
chevrons.
8. When the displayed value is correct press
the NEXT softkey to access the next field.
9. Repeat the process until the correct time
and date is displayed. Press the OK
softkey to store the values.
24 / 87
7001FAOPT73 ISS 13