Hospital Name - Alaris Medical Systems IVAC P7000 Manual Del Usuario

The hospital name allows the user to programme in the name of the hospital, ward or department
to appear during the power up display sequence.
7001FAOPT73 ISS 13
Configured Options
1. Press the ON/OFF power button OFF.
2. Hold down the START button and press
the power button ON.
3. The main display will show "000". Enter the
Access Code "251" using the rate selection
arrows.
4. Enter the first digit and press NEXT
indicated on the screen.
5. When the complete code has been entered
press the OK softkey indicated on the
screen.
6. Select HOSPITAL
chevrons and press the OK softkey
indicated on the screen.
7. To adjust the character displayed use the
chevrons.
8. When the displayed character is correct
press the NEXT softkey to access the next
field.
9. Repeat the process until the correct
Hospital Name is displayed. Press the OK
softkey to store the name.

Hospital Name

NAME using the
25 / 87