I. GENERAL INFORMATION
1. CONSTRUCTION (HRE-140B)
Refrigeration Unit
Front Panel
Door
2. ACCESSORIES
a) Shelf:
4 (70 type)
b) Rail (R) (L):
4+4 (70 type)
c) Power cord:
1 (UK)
d) Spanner:
1
e) Spacer:
4
f) Key:
2
II. INSTALLATION AND OPERATING
INSTRUCTIONS
1. LOCATION
IMPORTANT
This refrigerator/freezer is not intended for
outdoor use. Normal operating ambient
temperature should be within 5°C to 43°C.
For best operating results:
* The refrigerator/freezer should not be located
next to ovens, grills or other high heat producing
equipment.
* The location should provide a firm foundation for
the equipment.
Top Cover
Power Cord
Door Lock
Caster
Shelf
Fig. 1
8 (140 type)
8+8 (140 type)
1 (Continental)
* To adjust the height of the unit, use the spanner
(accessory) to loosen the casters and insert the
spacers (accessory). The unit should always be
level from side to side and back to front.
* All the four casters are provided with stoppers.
Always lock the stoppers of the front casters when
in use.
* Unlock the casters to move the unit for cleaning or
other purposes.
* Avoid a site where dripping is not allowed.
E s p e c i a l l y, a s i d e - b y - s i d e o r b a c k - t o - b a c k
installation (possibly with other manufacturer's unit)
may cause condensation between the two units,
resulting in dripping onto the floor.
* Do not expose the unit to direct sunlight or higher
temperatures.
* Allow at least 100cm clearance at the front of the
unit for smooth door operation. Also allow at least
30cm clearance from the ceiling to the top of the
unit for proper air circulation.
Min. 100cm
3
ENGLISH
Spacer
Spanner
Fig. 2
Min. 30cm
Fig. 3