Dispensing Coffee - Wega MININOVA Manual De Uso Y Mantenimiento

4.3

DISPENSING COFFEE

EPU version (semiautomatic)
• Put the coffee cup under the dispensing spout;
• press the dispensing switch (1);
• upon reaching the desired amount of coffee in the cup, stop
dispensing by means of the switch (1).
EVD version (electronic dosing)
Push button panel programming:
• put the coffee cup under the dispensing spout.
• press the PROG/STOP key (3) for at least 5 seconds until
the LED of the dose keys comes on;
• Press the desired dose key(2).
• when the desired dose has been attained, confirm by pressing
the PROG/STOP key (3);
• Repeat this operation for the other dose keys.
• automatic exit from programming after 5 seconds.
Coffee dispensing:
• put the coffee cup under the dispensing spout.
• press the desired dose key (2): wait for coffee to be deliv-
ered;
• to stop delivery of coffee in advance, press the delivery key
again (2) or press the
WARNING
During the programming phase the LED (4) fl ashes.
If the LED (4) fl ashes more frequently, refer to the chapter "Malfunctions and relative
solutions".
All manuals and user guides at all-guides.com
keyPROG/STOP (3).
use and maintenance manual
1
2
2 5
2
3
2
2
5
2
4
ENGLISH
3
PROG.
STOP
57