ENGLISH
Perforated disk and containment ring
Both the perforated disk (1) and its containment ring (2) should be
cleaned regularly in hot water.
Steam nozzle
The steam nozzles must be kept clean at all times. Check the ends of
the steam nozzles and clean them monthly, clearing out the exit holes
with a small needle.
Dispensing group
The cleaning of the internal parts of the delivery group is to be performed regularly in the following manner:
•
replace the normal filter of the filter-holder with a solid one;
•
pour a teaspoon of a suitable detergent powder on the solid filter, and attach the filter-holder to the
group;
•
use the delivery switch to set the group in operation;
•
repeat the above operations until the water comes out clean;
•
turn off and remove the filter-holder from the group;
•
rinse a final time, so as to remove any residual detergent.
Body
The body panels should be cleaned with a cloth soaked in warm water. Do not use abrasive detergents since the
panels could get scratched.
Grinder-doser
Every week clean the bell jar and the dosing device with a cloth soaked in lukewarm water, both inside and out.
WARNING
When cleaning, always use cloths that are completely clean and hygienic.
60
All manuals and user guides at all-guides.com
use and maintenance manual
2
1