Dispensing of the coffee
6.8
• Fill the filter with a dose of ground coffee and press
it with the special pusher;
• attach the filter holder to the dispenser unit;
• put the cup under the dispensing spout;
• press the dispensing switch ;
• upon reaching the desired amount of coffee in the
cup, stop dispensing by means of the switch .
Do not remove the filter-holder from the delivery group during
coffee dispensing.
USER manual
Suggestions on how to obtain a good
6.9
cup of coffee
Wash daily the filters and filter carrier as instructed in
Par. 7.5.2 . Failure perform this operation will compromise
the quality of the coffee dispensed.
To obtain high-quality coffee, it is important that the
hardness of the water used does not exceed 6-7 °f (French
degrees). If the water hardness exceeds these values, it
is advisable to use a water filter or softener. Avoid using
a water softener if the water hardness is less than 4 °f.
If the taste of chlorine in the water is particularly
strong, a special filter should be installed.
Do not to store large amounts of coffee beans. If the
type of coffee is changed, contact the Maintenance Tech-
nician for the water temperature and grind adjustment.
After the machine has not been used for a certain
period of time (2-3 hours) carry out a few dry runs. Be
sure to carry out regular cleaning and maintenance.
ROSSO
C:0 M:100 Y:100 K:0
NERO
C:0 M:0 Y:0 K:100
VERDE
C:100 M:0 Y:100 K:0
39
160
of