Dispensing With The Steam Wand; Dispensing With Autosteamer Wand - Wega io EVD Manual De Uso Y Mantenimiento. Instrucciones Para El Usuario

Dispensing with the steam wand

6.8
• Immerse the steam nozzle in the
liquid to be heated;
• Rotate the valve knob anticlock-
wise;
• The quantity of steam will be pro-
portional to how much the valve
is open;
• To stop dispensing, turn the valve's
knob clockwise.
Carefully move the steam nozzle using the specific anti-scald
rubber grip (6).
Avoid contact with the steam nozzle, do not place your hands or
other body parts near the steam nozzle tips.
To maintain the steam spouts terminals in perfect efficiency it is
suggested to carry out a short free dispensing at the end of every
use. Keep the tips clean at all times using a cloth dampened in
lukewarm water.
The use of the steam dispensing point
(steam nozzle), must always be preceded by
condensation draining for at least 2 seconds.
Leave the steam nozzle immersed in the milk
only for the heating time required.
Do not open the steam tap with the steam
spout immersed in milk while the machine
is off.
40

Dispensing with Autosteamer wand

6.9
• Immerse the steam nozzle into
the milk to be frothed;
• Press the hot frothed milk
button and wait for the steam
to be dispensed;
6
• To stop dispensing ahead of
time, press the
again.
To optimally froth the milk, follow these simple rules:
• Only heat the amount of milk that you intend to use;
once heated, it will have to be completely poured out
of the jug and cannot be reheated;
• Froth the milk which should be at a temperature of
around 4°C.
Carefully move the Autosteamer nozzle using the specific anti-
scald rubber grip (6).
Avoid contact with the nozzle, do not place your hands or other
body parts near the nozzle tips.
To maintain the steam spouts terminals in perfect efficiency it is
suggested to carry out a short free dispensing at the end of every
use. Keep the tips clean at all times using a cloth dampened in
lukewarm water.
The use of the autosteamer dispensing
point (nozzle), must always be preceded by
condensation draining for at least 2 seconds.
Leave the steam nozzle immersed in the milk
only for the heating time required.
Do not open the steam tap with the steam
spout immersed in milk while the machine
is off.
button
User manual
6