Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Automatic Transmission Exchange and Flushing machine
TECHNICAL DATA
Power supply: 12V (car battery)
Pump power: 70W
Pressure gauge diameter: 70 mm (both gauges)
Pressure gauge range: 0-10 Bar (0-150 PSI) (both gauges)
Tank capacity for fresh fluid: 30 Liter
Tank capacity for used fluid: 30 Liter
Oil hose: length 126 x Ø 12.5 mm (1/2") (red)
Oil hose: length 126 x Ø 12.5 mm (1/2") (black)
Oil hose: length 137 x Ø 12.5 mm (1/2") (red)
all hoses with male and female quick couplers
Max. hose pressure: 300 PSI
INTENDED USE
This Transmission Fluid Oil Exchanger remove, clean, and replace fluid from most types and models
of automatic gearboxes, transmissions, hydraulic torque transmissions, gearbox radiators and
radiation pipelines.
WARNING
When using tool, basic safety precautions should always be followed to reduce the risk of personal
injury and damage to equipment. Read all instructions, safety warnings and precautions before using
this tool.
SAFETY WARNINGS AND PRECAUTIONS
• Keep work area clean. Cluttered areas invite injuries.
• Observe work area conditions. Do not use machines or power tools in damp or wet locations.
Don't expose to rain. Keep work area well lighted. Do not use electrically powered tools in the
presence of flammable gases or liquids.
• Keep children away. Children must never be allowed in the work area. Do not let them handle
machines, tools, or extension cords.
• Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust.
Always lock up tools and keep out of reach of children.
• Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of
a larger industrial tool. There are certain applications for which this tool was designed. It will do
the job better and more safely at the rate for which it was intended. Do not modify this tool and
do not use this tool for a purpose for which it was not intended.
• Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts.
Protective, electrically non-conductive clothes and non-skid footwear are recommended when
working. Wear restrictive hair covering to contain long hair.
• Use eye and ear protection. Always wear ANSI approved dust mask or respirator when working
around chemical dusts and mists.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 7082
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
Tabla de contenido
