Beretta EXCLUSIVE MIX C.S.I. Manual Para La Instalación Y El Uso página 6

1
GENERAL SAFETY DEVICES
.
The boilers produced in our factory are built with care
down to the last component to protect both the user
and installer from eventual accidents. We therefore
recommend qualified personnel that after working on
the product they should pay particular attention to
the wiring, especially the bare wires, that must not
be exposed outside the terminal board for any rason
to prevent any contact with the live parts of the wiring.
This instructions manual is integral parts of the
product. Make sure they remain with the boiler, even
if it is transferred to another owner or user or moved
to another heating system. In case of loss or damage,
please contact your local Technical Assistance
Service for a new copy.
This boiler may only be installed and serviced by
qualified fitters who satisfy the requirements of local
rules. Work must be done in compliance with
regulations in force and subsequent updates.
The installer shall instruct the user in the operation
of the boiler and the safety devices.
This boiler may only be used for what it was expressly
built to do. The manufacturer declines all contractual
and non-contractual liability for injury to persons or
animals or damage to property deriving from errors
made during installation, adjustment and servicing
and from improper use.
This appliance is used to produce hot water and must
therefore be connected to a heating and/or a domestic
hot water system, according to its performance and
power.
After removing the packaging, make sure the contents
are undamaged and complete. If this is not the case,
contact your dealer.
The safety valve outlet must be connected to a
suitable collection and venting system. The
manufacturer declines all liability for any damage
caused by the safety valve.
The safety and automatic adjustment devices on the
appliance must never be modified during its lifetime,
except by the maker or
If the appliance develops a fault and/or works badly,
switch it off and do not attempt to repair it
Immediately after installation, inform the user that:
- in the event of leaks, he/she must shut off the water
supply and promptly inform the Technical Assistance
Service
- he/she must check from time to time to make sure
the symbol is not lit on the control panel. This
symbol means that the pressure in the water system
is incorrect. If necessary, fill the system as described
in the paragraph "Boiler functions"
- if the boiler is not planned to be used for a long
period, he/she should call in the Technical
Assistance Service to perform the following
operations:
dealer.
yourself.
• turn off the main boiler and general system
switches
• close the gas and water taps on both the heating
(MIX C.S.I.-MIX R.S.I.) and domestic hot water
circuits (MIX C.S.I. only)
• drain the heating (MIX C.S.I.-MIX R.S.I.) and
domestic hot water (MIX C.S.I. only) circuits to
prevent freezing
- the boiler must be serviced at least once a year.
This should be booked in advance with the Technical
Assistance Service.
Safety measures:
the boiler should not be used by children or
unassisted disabled people
electrical devices or equipment, such as switches,
appliances, etc., should not be used if there is a smell
of gas or fumes. If there is a gas leak, open all the
doors and windows to ventilate the area, turn off the
general gas tap and immediately call the Technical
Assistance Service
do not touch the boiler barefoot or if parts of your
body are wet or damp
press the button until "- -" is shown on the display
and disconnect the electricity supply by turning off
the two-position system switch, before cleaning
do not pull, detach or twist the wires from the boiler
even if they are not connected to the power supply
do not block or reduce the size of the ventilation
openings in the room
do not leave inflammable containers or substances
in the room
keep packaging out of reach of children
only use appliance for purposes it is devoted to
do not lean any object on the boiler
before cleaning, disconnect appliance from electric
supply network
do not tamper with sealed
6
elements.