Athletic HOME FITNESS EXTREME 2600BS Manual De Instrucciones página 6

3
E
5
Insert the vertical seat post (3) into the main frame (5) and align the holes. Fix with the
adjustment knob (E).
Slide the seat post (2) into the vertical seat post (3) and at the desired position, align the
holes and fix with the adjustment knob (E). Now fix the seat (1) to the seat post (2) as shown on the
third picture.
9
Slide the handlebar post (9) into the main structure (5) and align the holes. Fix with
the adjustment knob (E).
To attach the handlebar (12), position it above the handlebar support (9) and fix with
the handlebar adjustment knob (F)
ATTENTION: HANDLEBAR MUST BE SECURELY ATTACHED.
To install the monitor (H), use the philips screws (G) then plug the monitor cable.
STEP 4
L
The pedals are marked "L" and "R" - left and right. Connect them to their appropriate
crank arms. The right crank arm is on the right- hand side of the cycle as you sit on it. Note that the
right pedal should be threaded on clockwise and the left pedal anticlockwise.
06
english
All manuals and user guides at all-guides.com
STEP 2
3
2
E
STEP 3
12
9
E
5
R
F
1
2
H