cecotec BAMBA CERAMICCARE 5IN1 GYRO Manual De Instrucciones página 12

Ocultar thumbs Ver también para BAMBA CERAMICCARE 5IN1 GYRO:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 10
ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1.
Power cord
2.
Power selector
3.
Rotation button
4.
Releasing button
5.
Interchangeable brush
Fig. 2
1.
Comb for straightening hair
2.
40-mm round comb
3.
66-mm round comb
4.
76-mm round comb
5.
47-mm retractable bristles round brush
2. BEFORE USE
Take the product out of the box and remove all packaging material.
Make sure all parts and components are included and in good conditions. If any visible signs
of damage are observed, contact Cecotec's Technical Support Service immediately.
3. OPERATION
Wash and condition your hair.
Dry it with a towel and comb it.
Assemble the accessory to be used to the upper part of the air brush.Make sure that the
mains voltage matches the voltage stated on the rating label of the appliance and that the
outlet is grounded. Plug the device to a socket.
Warning: A slight odour and smoke might appear when heating the device for the first time.
This is completely normal and it will stop after using the device.
Install the accessory to be used with the slots aligned and turn the accessory to the left. You
will hear a click when it is correctly into place. Select level 1 with the power selector to fix
your hair with a strong and warm air flux. Select level 2 for a fast drying and combing, or the
Cold drying for a soft drying, avoiding your hair from overheating.
After using the device, use hairpsray or foam on your hair.
To remove the accessory, press the releasing button and pull it out gently.
The device includes an automatic-rotation function.
Long press the rotating button so the accessory will rotate to the right or the left.
22
CERAMICCARE 5IN1 GYRO
Unplug the device when it is not longer going to be used.
How to curl the hair
Comb your hair and form locks.
Take a hair lock and brush it with the brush for small locks. Once done, turn the tip inwards or
outwards.
Keep this position from 7 to 10 seconds and remove it.
Repeat this step with the rest of your hair.
When finished, shape it using your fingers.
After using
Turn the device off and unplug it.
Place it on a heat-resistant surface until it cools down.
Remove the hair and dust from the device and accessories.
Clean the device with a soft cloth and store it in a dry place.
4. CLEANING AND MAINTENANCE
Before cleaning the device, disconnect it from the power outlet and allow the appliance to
cool down.
Clean the upper part of the device with a soft damp cloth.
Do not immerse the whole unit into water or other liquids.
Do not use abrasive scouring pads, powders or cleaners to clean the product.
Do not twist, bend, strain, or damage the power cord in any way.
Clean the dirt and hairs that may be clogging the device.
5. TECHNICAL SPECIFICATIONS
Product reference: 04241
Product: Bamba CeramicCare 5in1Gyro
Power: 1000 W
Voltage: 220-240V~, 50/60Hz
Made in China | Designed in Spain
6. TROUBLESHOOTING
ENGLISH
CERAMICCARE 5IN1 GYRO
23

Publicidad

Tabla de contenido
loading

Tabla de contenido