Connecting Bluetooth Enabled Mobile Phones, Gps Or Mp3 (A2Dp) Devices; Mobile Phone - SCHUBERTH SRC‑System Guía De Usuario

6. CONNECTING BLUETOOTH ENABLED MOBILE
PHONES, GPS OR MP3 (A2DP) DEVICES
multiple Device Connectivity ("mDC") with Bluetooth®
compatible Devices
Thanks to MDC technology the SRC‑System™ offers parallel connec-
tivity as follows*:
➤ Intercom with up to two other SRC‑System™ headsets
➤ Bluetooth enabled Mobile Phone / GPS device
➤ A2DP enabled MP3 Player or A2DP Adapter
MP3 MP3
player player
Bike-to-Bike Bike-to-Bike
Intercom Range* Intercom Range*
Built-in Built-in
FM radio FM radio
NOTe: If you plan to use your mobile phone while using a Bluetooth® GPS
device, then you should pair your mobile phone to the GPS and not to the
SRC‑System™ headset.
* see restrictions under 9.4 b
28
QG SRC 207 - MAN00015 indd 28
GPS GPS
Mobile phone Mobile phone
& A2DP connectivity & A2DP connectivity

6.1 MOBILE PHONE

To use your Bluetooth® mobile phone with the SRC‑System™, you
must first pair the two devices.
NOTe: If you plan to use a GPS device in parallel with your mobile phone, then you
should pair your mobile phone to the GPS device and not to the SRC‑System™. In
such case, skip this section and proceed directly with section 6.2.
Pairing is a one time process. Once the headset is paired to a
specific mobile phone, they will remain paired and automatically
recognize each other whenever they are within range.
If the connection between the phone and headset is lost, tap the
Mobile Button on your headset to reconnect the devices.
PAIRING tHe HeADSet tO A BLUETOOTH mOBILe PHONe:
1. Turn on your phone and make sure its Bluetooth® function is activated.
Turn on your headset by pressing the Mobile Phone Button for at least
three seconds resulting in three blue flashes.
2. with the SRC‑System™ turned ON, press and hold the Mobile
Button for at least six seconds until the Red and Blue Lights begin
rapidly alternating.
3. Search for Bluetooth® devices on your phone by following the phone's
instructions. Consult your phone's User Manual for more information.
4. After a few seconds the phone will list "SRCS" (incl. its software
version) as a discovered device. Select it and follow your phone's
instructions to accept the pairing.
5. when prompted, enter 0000 (four zeros) as your PIN or passkey.
6. Your phone will confirm that pairing has succeeded and the headset
will begin flashing slowly in Blue.
NOTe: Not all Bluetooth® mobile phones can broadcast Bluetooth®
Stereo music (A2DP), even if the phone has an MP3 player application.
Consult your mobile phone's User Manual for more information.
with some mobile phones, you may need to tap the Mobile Button to con-
nect the headset to the phone after pairing is complete. The SRC‑System™
will automatically connect to the last phone connected to the headset.
2/1/11 11 38 AM