Basic Setup And Configuration; General Functions; Spoken Status Announcements; Audio Sources And Priorities - SCHUBERTH SRC‑System Guía De Usuario

4. BASIC SETUP AND CONFIGURATION

4.1 GENERAL FUNCTIONS

DeSIReD ReSULt ReQUIReD ACtION
Turn on the headset
Press and hold the Mobile Button for at least
four seconds
LED indication: Three blue flashes.
Audio feedback: Ascending tone (low-high).
Turn off the headset
Press and hold the Mobile Button for at least
three seconds
LED indication: Three red flashes.
Audio feedback: Descending tone (high-low).
Increase the volume of Tap the Volume Up Button (sets and saves the
the current audio source
volume per source)
Decrease the volume of Tap the Volume Down Button (sets and saves
the current audio source
the volume per source)
Mute Simultaneously tap Volume Up and Volume
Down while any audio is on
Battery Level Indicator While on standby, press and hold the Volume
Up Button for 3 seconds
Blue light = Battery is fully charged
Red/blue light = Battery is half full
Red light = Battery is almost empty

4.2 SPOKEN STATUS ANNOUNCEMENTS

Your SRC‑System™ headset offers various audio status messages
sent through your speakers. Among others, it will announce your
connection state, e.g. whether you are in mobile phone or on
intercom mode, it will confirm changes of such modes and more. By
default the feature is ON, and can be disabled as outlined below.
The Voice menu can be set at any one of the available language
options.
entering the Voice menu: Press and hold the CHANNEL "A" button
and CHANNEL "B" button simultaneously for 3 seconds while the
QG SRC 207 - MAN00015 indd 25
headset is on standby. Now, follow the voice instructions in English
or choose your preferred language.
Disable/enable status announcements: while on standby, press
and hold the Volume Down Button for 6 seconds.
LED ON: indication: Solid blue + Audio feedback: One short beep
LED OFF: indication: Solid red + Audio feedback: Two short beeps

4.3 AUDIO SOURCES AND PRIORITIES

The different audio sources connected to the SRC‑System™ are
prioritized as shown below, i.e. the higher priority source will always
override and interrupt the lower one.
For example, incoming mobile phone calls will interrupt ongoing
Intercom calls, while incoming intercom calls will interrupt the audio
from the built-in FM Radio etc.
1. mobile phone audio or GPS instructions
Higher Priority

(device specific)
2. Intercom / Click-to-Link
3. A2DP audio source
4. Fm Radio (built‑in)
5. Auxiliary Line‑In Port (for corded connection
Lower Priority
e.g. mP3 players).

4.4 SOFTWARE UPGRADE OPTION

In the future you will be able to install Software upgrades and program
patches to keep the software of your SRC‑System™ up-to-date. Among
others, future Software upgrades will include
additional status announcements and other valu-
able functions. To ensure that you don't miss out on the latest versions,
please register online at www.schuberth.com/src‑register/en and
have your serial number ready. To download upgrades, please use the
USB cable included in the SRC‑System™'s retail package.
Upgrades are only available for windows® based computers with
XP™, Vista™ or windows 7™ operating systems.
25
2/1/11 11 38 AM