Publicidad
Step 9
First, fi ll two holes in the RIGHT UPRIGHT (D) 1/4 to 1/2 full with GLUE (54M). Then,
å
insert two WOOD DOWELS (15F) into the holes. Wipe away the excess GLUE.
NOTE: Be sure to position the parts exactly as shown.
å
Now, fi ll the holes in the LEGS (H and P) 1/4 to 1/2 full with GLUE (54M).
å
Fasten the LEGS (H and P) to the RIGHT UPRIGHT (D). Tighten six
å
HIDDEN CAMS.
NOTE: Be sure the WOOD DOWELS in the RIGHT UPRIGHT insert into the LEGS.
å
Wipe away the excess GLUE.
15F
These surfaces
should be even.
15F
These surfaces
should be even.
Page 14
P
D
S u r
f a c
H I D
e w
D E N
i t h
C A
M S
H
421934
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
Fill the holes 1/4 to 1/2 full with GLUE.
Edge with hole
Edge with
TWIST-LOCK®
FASTENERS
Edge with hole
www.sauder.com/services
54M
Publicidad
